Each TesiraFORTÉ X device incorporates an embedded web interface that manages parameters of the devices via a web browser. The TesiraFORTÉ X ships pre-configured and requires no set-up or configuration via Tesira software for room deployment. All models of the TesiraFORTÉ X are equipped with Biamp Launch, a simple, one-button solution to configuring room audio.
To configure a TesiraFORTÉ X via Tesira software, access the device via Device Maintenance and clear the default configuration as needed. The contents of this webhelp are intended to assist users in successfully deploying a factory-configured TesiraFORTÉ X through Biamp Launch. Advanced knowledge of Tesira software is not required.
Connect to the device webpage via the device's IP address. An applet is available from Biamp that will find the device IP if needed. Once connected, users will need to enter credentials.
Default credentials are as follows:
Username: admin
Password: device serial number
If changing the password, parameters are a minimum of 8 characters and a maximum of 30 characters.
The username and password will reset to the default values following a factory.
Firmware updates will not affect the credentials.
The Side Menu lists each page accessible from the main page with a brief description of the contents of each. See detailed information on the functions by clicking the links below:
The Devices page provides information about the TesiraFORTÉ X and all of the connected devices and the associated systems discovered on the network, including unassigned devices that are part of a system.
The audio page shows connected device and allows making adjustments to audio settings. Biamp Launch is also initiated from the Audio page. Upon successful launch a high level Report Card or more detailed Advanced Report are available to provide room acoustics and adjustments made during Launch.
All network settings, including IP configuration, control and media port assignments, etc. are available from the Network page.
The TesiraFORTÉ X may be rebooted from this page. Users also have the option to make time zone adjustments, update firmware and change the device password.
VoIP configuration and settings are available via the VoIP pages. Both Standard and Advanced settings are available.
The Event Scheduler page allows users to schedule events via presets and enables end-users to schedule the execution of user-created events at specific times. This feature can compliment existing 3rd-party control systems.
The Troubleshooting page provides system status and event logs that can assist users in identifying issues in a system.
The About page gives legal and other information about the installed software.